After it's long journey to you, your valve will need to be checked before you inflate the board. The valve can loosen from temperature and pressure changes on it's journey to you.  If the valve isn't checked right away, it could loose air on your maiden voyage! 

This is part of normal maintenance and it is why we include the wrench in your order! If you aren't sure what to look for, we have attached photos below. Simply use the valve wrench to tighten the valve.  We recommend checking this regularly. 

Please note: the valve wrench is used to tighten and remove the valve. Please DO NOT use the wrench to deflate the board. Deflating the board should be done with the pin on the valve.